Delivery
* Free delivery above Rs. 1000* COD payment upto Rs. 5000* 7 days easy replacement policy * Bulk orders are shipped through surface and therefore might take more than 10 days for delivery
We have a site-wide replacement policy under the following conditions:
1. Wrong order.
2. Defective or damaged product.
3. Considerably different from the description on ShakeDeal's platform.
4. In case of bearings or power transmission belts, replacement will not be accepted if the seal or shield has been removed.
5. The replacement has to be initiated within 7 days of receiving the order.
100% Authentic and Genuine Products. Secure and Safe Payments.
NA
NA
Description
3-ply cutters reducing tip crack even with hard use. Realizes light and speedy drilling and long lifetime.
The 25mm effective depth enables drilling ranging from thick steel plate to curved face drilling in thick metal pipes.
Adopts the step center drill that dampens impacts that occur when the center drill passes through.
Effective length: 25mm(Full depth: 25 mm)
Matching Drill: Electric drill/drilling machine/Percussion drill(rotating mode)
Ejector spring fitted as standard/compatible with pipes and stainless steel
Used in: Sheet metal (HB200 or less) Stainless steel (10mm ore less) Pipe, Aluminum (5mm ore less), FRP, PVC, Plastic.
3-Ply Cutters: Cutting the shavings to one-third with respect to the cutting width using 3-ply cutters (outer, inner and intermediate cutting blades) has dramatically decreased cracks on the tip corner. This also includes inside cutting edges so debris can be discharged smoothly.
Compatible with Pipe-Drilling: Pipes and curved-surface materials can be drilled at a throat depth of 25 mm.
Hole Saw Drilling Efficiency: Hole saw drilling has a smaller cutting area compared to steel drills, enabling short-time drilling.
Drilling swarf discharge groove : Drilling swarf is efficiently discharged through these drilling swarf discharge grooves to the peripheral side.Clogging of drilling swarf between the work material and cutting edge makes drilling impossible, which leads to tips cracking and chipping
Shavings escape holeAn escape hole, which is convenient for shavings removal, is equipped with hole saws of all diameter.
Newly developed step center drill: Two-step structure of the center drill tip end dampens impacts that occur when the center drill passes through, preventing cracking of the tungsten carbide/ultra-hard tip.
10 mm/13 mm chuck combination shank: Allows for most drill chuck diameters.
Appropriate rotation speed: Use the drill at a rotation speed appropriate for the drilling work material and diameter.When drilling a thick plate with a thickness of 5 mm or more or for continuous cutting, select a lower rotation speed.
Select EMI as your payment option at the time of payment.
Final EMI is calculated on the total value of your order at the time of payment.
The Bank charges annual interest rates according to the reducing monthly balance. In the monthly reducing cycle, the principal is reduced with every EMI and the interest is calculated on the outstanding balance.
The is no minimum order value to avail the EMI payment option.
While you will not be charged a processing fee for availing ShakeDeal’s EMI option, the interest charged by the bank shall not be refunded by ShakeDeal.
You may check with the respective bank/issuer on how a cancellation, refund or pre-closure could affect the EMI terms, and what interest charges would be levied on you for the same.
For select banks, the interest amount on the first EMI will be calculated from the loan booking date till the payment due date.