Delivery
* Free delivery above Rs. 1000* COD payment upto Rs. 5000* 7 days easy replacement policy * Bulk orders are shipped through surface and therefore might take more than 10 days for delivery
We have a site-wide replacement policy under the following conditions:
1. Wrong order.
2. Defective or damaged product.
3. Considerably different from the description on ShakeDeal's platform.
4. In case of bearings or power transmission belts, replacement will not be accepted if the seal or shield has been removed.
5. The replacement has to be initiated within 7 days of receiving the order.
100% Authentic and Genuine Products. Secure and Safe Payments.
NA
NA
Description
Suitable for Audi A4 (up to ‘2000) / VW Passat (up to ‘2005) front axle
The extractor KL-0250-40 with its pressure unit allows the quick and professional extraction of the clamping bolt and both upper pivot pins
The tool can be used for both left-hand and right-hand wheel suspension assemblies
Application:
Mount tool with pressure unit on the steering knuckle (pressure drift no. I is already inserted).
Use impact gun to drive the hex nut and press out the clamping bolt.
The clamping bolt must be removed in three stages using the pressure unit. For this, insert the drifts II and III successively.
Remove the hex clamping bolt completely. If the hex clamping bolt remains stubborn, the supplement pressure drift set KL-0250-402 allows the bolt to be pressed out completely.
Remove the hexagonal nut. Completely remove the pressure drift so that the clamp bore is empty.
Push both pivot pins out of the clamping bore using the pressure spindle.
Advantages:
Time savings of approx. 2 - 4 hours
No risk of damage to the suspension components
Product Specifications
GENERAL
Brand:
Gedore Klann
Model:
KL 0250 40
Product:
Extractor For Clamping Bolt And Ball Joints
Suitable for:
Audi A4 (up to 2000, VW Passat up to 2005 front axle
Select EMI as your payment option at the time of payment.
Final EMI is calculated on the total value of your order at the time of payment.
The Bank charges annual interest rates according to the reducing monthly balance. In the monthly reducing cycle, the principal is reduced with every EMI and the interest is calculated on the outstanding balance.
The is no minimum order value to avail the EMI payment option.
While you will not be charged a processing fee for availing ShakeDeal’s EMI option, the interest charged by the bank shall not be refunded by ShakeDeal.
You may check with the respective bank/issuer on how a cancellation, refund or pre-closure could affect the EMI terms, and what interest charges would be levied on you for the same.
For select banks, the interest amount on the first EMI will be calculated from the loan booking date till the payment due date.